新西兰嵌入式灯具各等级标准要求如下: 1,NON IC:Not allowed to have any insulation within 100mm and cannot be installed in residential buildings 2,CA 135:Type CA 135, closed abutted, recessed luminaire wher fixed, building insu-lating material that can safely be exposed continuously to temperatures up to 150°C must not cover but may closely abut the sides of the luminaire. The symbol shall be permanently marked on the back of the fitting, be clearly visible, at least 20 mm high and clearly legible. 3,CA 80:Type CA 80, closed abutted, recessed luminaire wher fixed, building insulat-ing material that can safely be exposed continuously to temperatures up to 90°C must not cover but may closely abut the sides of the luminaire. The symbol shall be permanently marked on the back of the fitting, be clearly visible, at least 20 mm high and clearly legible. 4,IC:Type IC recessed luminaire wher building insulation that can safely be ex-posed continuously to temperatures up to 90°C may abut and cover the lu-minaire. The symbol shall be permanently marked on the back of the fitting, be clearly visible, at least 20 mm high and clearly legible. 5,IC-F:Type IC-F recessed luminaire wher building insulation that can safely be exposed continuously to 90°C may abut or cover the luminaire. The symbol shall be permanently marked on the back of the fitting, be clearly visible, at least 20 mm high and clearly legible. Resistant to ingress of external matter. 澳大利亚与新西兰产品安全认证介绍: 澳大利亚目前暂时还没有统一的安全认证标志,然而随着2013年3月1日起正式实施澳洲RCM标志后,澳洲将有统一的安全标志了。对消费者来说,只需要购买有RCM认证标志的产品,就表示产品符合安全认证和电磁兼容要求。或者说,RCM认证是SAA认证和C-TICK认证两者的统一。 LED筒灯澳洲安全SAA认证标准AS/NZS 60598.2.2:2001 而筒灯一般外置电源的,LED驱动电源是属于管制类电器,所以必须强制要求有SAA认证。 LED驱动SAA认证的标准是 AS/NZS 61347.1 / IEC 61347-2-13 管制类电气产品根据AS/NZS4417.2划分,包含电热设备、制冷设备、电动工具、零部件等。目录在**的公报上公布,并根据实际情况增加。昆士兰州、新南威尔士州及维多利亚州在认证进程中较为活跃。以昆士兰州为例,电力法(the electricity Act 1994)宣布了电器认证、销售及使用的详细规定。 1、管制类电器:管制类电器强制必须取得由监控部门颁发的认可证书(certificate of approval),并且规定标识(必须打上证书号)。应当注意的是,认证程序只针对安全性而非性能或品质,除非与安全性相关。证书号的**个字母显示该证书由哪个州或地区颁发。 2、非管制类电器:非管制类产品虽然不强制取得认证,但其安全性由销售商/生产商负责,可以自愿申请认证。监控部门将为符合标准要求的产品颁发符合性证书(Certificate of Suitability).取得符合性证书的电器产品可以打上证书号,证书好最后的字母显示该证书由哪个州或地区颁发,如: CS/431/Q(昆士兰) CS/108/N(新南威尔士) 咨询热线: Carl yang/杨工 深圳立讯检测股份有限公司 (中国合格评定国家认可**认可实验室CNAS NO.L4595) Shenzhen LCS Compliance Testing Laboratory Ltd.(CNAS No.L4595) 深圳市宝安区宝安大道通达路星源科技园 深圳市光明新区公明街道办文阁路中裕绿色高新产业园B栋1-2楼B区 电话: 0755-29871520-3502 Q E-mail: carl.yang@